This version is supplied in solid board approx 600 Mic thick and folds over to give extra strength. A custom made corrugated insert can be inserted to hold your items. We have a standard cutters for this design with following dimensions.

This unit is made by mounting Litho printed board on to E-Flute Corrugated board. The back of the unit has a latch to hold the books in place without leaning forward. We have a standard cutter with following dimensions or we can made to suite your products.

Standard Cutter Dimension

This box is made from Litho Laminated E Flute corrugated. The card is diecut and supplied flat for assembly as the pin badges are packed. The front has a small box section to allow the collection of the coins with a small flap which allows the money to be removed.

Flat Sheet size	610mm x 390mm
Internal Area	180mm x 130mm
Back Height including Header	220mm
Front height	40mm
Outer Dimensions	192mm x 172mm x 40mm

This Display Unit is made from B-Flute Corrugated board. Custom inserts can be made to fit your product. Header card is also available and can cut custom shapes. Standard Tray diemsions as follows.

Four Tier Counter display unit, made from B-flute Corrugated cardboard. Assembly instructions are included in the pack. Header Cards are also available to fit to the back of the dispenser. We have 2 different stock sizes for this designs as below.

• Flat Packed size: 560mm x 460mm
• Base Size: 337mm x 235mm
• Back Height: 285mm
• Front Height: 85mm
• Shelf Length (Internal): 322mm
• Single back Strut

Wide Counter Display Unit

• Flat Packed size: 565mm x 704mm
• Base Size: 610mm x 235mm
• Back Height: 285mm
• Front Height: 85mm
• Shelf Length (Internal): 590mm
• Double back Strut

This unit made by mounting a digital print on to corrugated board and then die cut on a digital CAD system. This method is suitable for small runs up to 50 units.

for larger order we will require to have a new Die made.

Dimensions

• Pocket Size - 50mm x 50mm
• Header Size - 280mm
• Base Area - 210mm x 210mm
• Front Height - 40mm

This carton is designed to hold 10 small bottles of glue. The product can be sent out ready packed in the box, the retailer then tears off the front and sides of the carton to show the products at their best.

Flat packed size	410mm x 300mm
Length	185mm
Width	105mm
Front height	115mm
Back height including header	185mm

This display unit was made to hold sunscreen lipsticks, the design is basically a shaped carton with a double thicknesss backboard. The pack is supplied to the manufacturers glued and flatpacked. The manufacturer loads the product then folds the top over and secures with tape to pack for despatch. The backing card is pulled back and the locking strutt on the rear locks in place.